Delete A Custom Firewall Zone - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

4. For Zone, select External.

5. Click Apply to save the configuration and apply the change.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the

Connect IT 4 local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. At the config prompt, type:

(config)> network interface lan zone my_zone

4. Save the configuration and apply the change:

(config)> save

Configuration saved.

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Delete a custom firewall zone

You cannot delete preconfigured firewall zones. To delete a custom firewall zone:

1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access

2. Access the device configuration:

Remote Manager:

Digi Connect IT® 4 User Guide

Firewall configuration