Required Additional Equipment; Cellular Only: Insert The Core Module - Digi Connect IT 4 User Manual

Get started with Connect IT
Equipment
CORE module cover and cover
screws (2)
Mounting screws
Loose label sticker

Required additional equipment

Equipment
Ethernet cable
SIM card

Cellular ONLY: Insert the CORE module

Note If you are connecting to a network using an Ethernet connection, you can skip this section. See
Connect hardware and connect to site network using an Ethernet
Digi Connect IT® 4 User Guide
Description
See
Connect hardware and connect to a cellular
These are used to mount the Connect IT 4 to a wall or another
surface.
A loose label sticker that includes the unique device password is
included in the box. This default password will be needed if the
device is factory reset and you want to access the web UI on the
device.
Retain this label sticker with your hardware records.
See QR code definition for information about the QR code.
Description
CAT 5/6 Ethernet cable
The cable is used to connect your PC to the Connect IT 4 for initial
configuration.
See Connect hardware and connect to site network using an
Ethernet LAN.
An activated SIM card provided by your cellular network operator.
You can insert up to two SIM cards in the CORE module. See
Cellular ONLY: Insert the CORE
The Connect IT 4 supports the standard mini-SIM cards (2FF).
Note This is required only if you are using a CORE module to
connect to a cellular network. See
to a cellular network.
Cellular ONLY: Insert the CORE module
network.
module.
Connect hardware and connect
LAN.
21