Digi Connect IT 4 User Manual page 535

Services
To define actions that will be taken when the device exits the geofence, or is outside
n
the geofence when it boots:
a. (Optional) Configure the device to preform the actions if the device is outside the
b. Set the number of
c. Add an action:
d. Set the type of action:
Digi Connect IT® 4 User Guide
v. A sandbox is enabled by default to prevent the script from adversely affecting
the system. To disable the sandbox:
(config service location geofence test_geofence on_entry
action 0)> sandbox false
(config service location geofence test_geofence on_entry
action 0)>
If you disable the sandbox, the script may render the system unusable.
vi. Repeat for any additional actions.
geofence when it boots:
(config)> service location geofence test_geofence on_exit bootup
true
(config)>
update_intervals
actions:
(config)> service location geofence test_geofence on_exit num_
intervals int
(config)>
For example, if the update interval is 1m (one minute) and the num_intervals is set
to 3, the actions will not be performed until the device has been outside the
geofence for three minutes.
i. Type ... to return to the root of the configuration:
(config service location geofence test_geofence coordinates
3)> ...
(config)>
ii. Add the action:
(config)> add service location geofence test_geofence on_exit
action end
(config service location geofence test_geofence on_exit action
0)>
(config service location geofence test_geofence on_exit action 0)>
type value
(config service location geofence test_geofence on_exit action 0)>
that must take place prior to performing the
Location information
535