Digi Connect IT 4 User Manual page 487

Services
b. To override the standard SSH configuration and only use the config_file parameter:
(config)> service ssh custom override true
(config)>
n
n
c. Set the configuration settings:
(config)> service ssh custom config_file value
(config)>
where value is one or more entires in the form of an OpenSSH sshd_config file. For
example, to enable the diffie-helman-group-sha-14 key exchange algorithm:
(config)> service ssh custom config_file "KexAlgorithms +diffie-hellman-
group14-sha1"
(config)>
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® 4 User Guide
If override is set to true, entries in Configuration file will be used in place of the
standard SSH configuration.
If override is set to false, entries in Configuration file will be added to the
standard SSH configuration.
The default is false.
Configure SSH access
487