Digi Connect IT 4 User Manual page 126

Interfaces

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the WAN or select an existing WAN:
To create a new WAN, for Add interface, type a name for the WAN and click .
n
To edit an existing WAN, click to expand the WAN.
n
The Interface configuration window is displayed.
New WANs are enabled by default. To disable, toggle off Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select External.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
126