Digi Connect IT 4 User Manual page 8

Configure Remote Power Management
Configure communication between the Connect IT, power controller, and a device
Create an access control to specify which users can access which outlets
Manage power to the power controller outlets
Configure the Connect IT to connect to a power controller using a serial port
Configure a serial port for Power Management
Connect a power controller to the Connect IT serial port
Configure the power controller and the outlets for use with a serial port on the Connect IT
Connect a 3rd-party device to the Connect IT serial port and the power controller
Configure the Connect IT to connect to a power controller using the network
Configure communication with a power controller using the network
Connect the Connect IT to your network
Connect a 3rd-party device to a serial port on the Connect IT and then to the power
controller
Create an access control group for power management and assign to users
Manage the power to the power controller outlets from the Connect IT
Control the outlet power from a terminal (all users)
View power controller status and manage power (Administrators)
Control the outlet power from the Serial Status page
Configure Connect IT features
Configure automatic detection
Configure automatic detection from the web UI
Configure automatic detection from the script
Configure data pattern matching
Send Email notification and/or an SNMP trap when an event occurs
Configure email event notification
Configure an SNMP trap
Interfaces
Wide Area Networks (WANs)
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs)
Configure WAN/WWAN priority and default route metrics
WAN/WWAN failover
Configure SureLink active recovery to detect WAN/WWAN failures
Configure the device to reboot when a failure is detected
Disable SureLink
Example: Use a ping test for WAN failover from Ethernet to cellular
Using Ethernet devices in a WAN
Using cellular modems in a Wireless WAN (WWAN)
Configure a Wide Area Network (WAN)
Configure a Wireless Wide Area Network (WWAN)
Show WAN and WWAN status and statistics
Delete a WAN or WWAN
Default outbound WAN/WWAN ports
Local Area Networks (LANs)
About Local Area Networks (LANs)
Configure a Local Area Network (LAN)
Configure the WAN port as a LAN or in a bridge
Change the default LAN subnet
Show LAN status and statistics
Digi Connect IT® 4 User Guide
40
40
40
41
41
42
42
43
44
44
45
45
46
47
47
47
48
49
49
50
51
52
52
53
55
56
56
59
60
77
90
99
101
102
125
133
143
145
146
147
148
148
155
163
165
8