Digi Connect IT 4 User Manual page 725

Firewall
A white list of devices, based on either IP address or firewall zone, that are authorized to
n
leverage this forwarding rule.
To configure a port forwarding rule:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Port forwarding.
4. For Add port forward, click .
The port forwarding rule configuration window is displayed.
Port forwarding rules are enabled by default. To disable, toggle off Enable.
5. (Optional) Type a Label that will be used to identify the rule.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Port forwarding rules
725