Digi Connect IT 4 User Manual page 441

Virtual Private Networks (VPN)
Required configuration items
For L2TP access concentrators:
n
The hostname or IP address of the L2TP network server.
l
The firewall zone for the tunnel.
l
For L2TP network servers:
n
The IP address of the L2TP access concentrator.
l
The local IP address assigned to the L2TP virtual network interface.
l
The IP address assigned to the remote peer.
l
The firewall zone for the tunnel.
l
Additional configuration items
The UDP port that L2TP servers will listen on, if other than the deafult of 1701.
n
Access control for the L2TP tunnel.
n
For L2TP access concentrators:
n
L2TP network server port.
l
The username and password of the L2TP server.
l
The metric for the tunnel.
l
Enable custom PPP configuration options for the tunnel.
l
Whether to override the default configuration and only use the custom options.
o
Optional configuration data in the format of a pppd options file.
o
For L2TP network servers:
n
The Authentication method.
l
The metric for the tunnel.
l
Enable custom PPP configuration options for the tunnel.
l
Whether to override the default configuration and only use the custom options.
o
Optional configuration data in the format of a pppd options file.
o

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
L2TP
441