Configure The Device As An Ntp Server - Digi Connect IT 4 User Manual

Services

Configure the device as an NTP server

Required Configuration Items
Enable the NTP service.
n
At least one upstream NTP server for synchronization. The default setting is the Digi NTP
n
server, time.devicecloud.com.
Additional Configuration Options
Additional upstream NTP servers.
n
Access control list to limit downstream access to the Connect IT 4 device's NTP service.
n
The time zone setting, if the default setting of UTC is not appropriate.
n
To configure the Connect IT 4 device's NTP service:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > NTP.
4. Enable the Connect IT 4 device's NTP service by clicking Enable.
5. (Optional) Configure the access control list to limit downstream access to the Connect IT 4
device's NTP service.
To limit access to specified IPv4 addresses and networks:
n
a. Click IPv4 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv4 address or network that can access the device's NTP
Digi Connect IT® 4 User Guide
service. Allowed values are:
Use Digi Remote Manager to view and manage your
Network Time Protocol
561