Digi Connect IT 4 User Manual page 553

Services
To view information about Modbus gateway clients, click Clients.
n
To view statistics that are common to both the clients and server, click Common
n
Statistics.
To view configuration details about the gateway, click the  (configuration) icon in the
n
upper right of the gateway's status pane.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modbus-gateway
> show modbus-gateway
Server Connection
-----------------
modbus_socket
modbus_socket
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
>
If the message Server connections not available is displayed, this indicates that there are no
connected clients.
3. Use the show modbus-gateway verbose
information:
> show modbus-gateway verbose
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
Common Statistics
-----------------
Configuration Updates
Client Configuration Failure
Server Configuration Failure
Configuration Load Failure
Incoming Connections
Internal Error
Digi Connect IT® 4 User Guide
command at the system prompt:
IP Address Port Uptime
----------- ----- ------
10.45.1.139 49570 6
10.45.1.139 49568 13
Uptime
------
0
0
428
command at the system prompt to display more
Uptime
------
0
0
506
: 1
: 0
: 0
: 0
: 4
: 0
Modbus gateway
553