Digi Connect IT 4 User Manual page 78

Interfaces
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new interface or select an existing one:
To create a new interface, see
n
Area Network
To edit an existing interface, click to expand the appropriate interface.
n
5. After creating or selecting the interface, click SureLink.
By default, SureLink is enabled for the preconfigured WAN (WAN) and WWAN (Modem). The
default configuration tests the DNS servers configured for the interface.
When SureLink is configured for Wireless WANs, SureLink tests are only run if the cellular
modem is connected and has an IP address. Use the SIM failover options to configure the
Connect IT 4 device to automatically recover the modem in the event that it cannot obtain an
IP address. See
failover.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Configure a Local Area Network
(WAN), or Configure a Wireless Wide Area Network
Configure a Wireless Wide Area Network (WWAN)
Wide Area Networks (WANs)
(LAN), Configure a Wide
(WWAN).
for details about SIM
78