Display Help For Commands And Parameters; The Help Command; The Question Mark (?) Command - Digi Connect IT 4 User Manual

Command line interface

Display help for commands and parameters

The help command

When executed from the root command prompt, help displays information about autocomplete
operations, how to move the cursor on the Connect IT 4 command line, and other keyboard shortcuts:
> help
Commands
-------------------------------------------------------------------------------
?
<Tab>
<Space>
<Enter>
Ctrl + A
Ctrl + E
Ctrl + W
Ctrl + R
Ctrl + left
Ctrl + right
>

The question mark (?) command

When executed from the root command prompt, ? displays available commands:
> ?
Commands
-------------------------------------------------------------------------------
config View and modify the configuration
exit Exit the CLI
analyzer Analyzer commands.
cp Copy a file or directory.
grep Grep a file.
help Show CLI editing and navigation commands.
ls List a directory.
mkdir Create a directory.
modem Modem commands.
more View a file.
mv Move a file or directory.
ping Ping a host.
reboot Reboot the system.
rm Remove a file or directory.
scp Copy a file or directory over SSH.
show Show instance statistics.
system System commands.
tail Tail a file.
traceroute Print the route packets trace to network host.
Digi Connect IT® 4 User Guide
Show commands help
Tab completion, displays all valid commands to complete command,
if only one command is possible, it is used
Like tab except shortest prefix is used if command is valid
Enter an input. If quoting then a new line is created instead. If
the input is invalid then characters will be deleted until a
prefix for a valid command is found.
Move cursor to start of line
Move cursor to end of line
Delete word under cursor until start of line or [\',", ,\,/,.]
If the current input is invalid then characters will be deleted
until a prefix for a valid command is found.
Jump cursor left until start of line or [\',", ,\,/,.]
Jump cursor right until start of line or [\',", ,\,/,.]
Display help for commands and parameters
914