Digi Connect IT 4 User Manual page 381

Virtual Private Networks (VPN)
Repeat this step to list additional interfaces.
To limit access based on firewall zones:
n
(config vpn openvpn server name)> add acl zone end value
(config vpn openvpn server name)>
Where value is a firewall zone defined on your device, or the any keyword.
Repeat this step to include additional firewall zones.
9. (Optional) Set additional OpenVPN parameters.
a. Enable the use of additional OpenVPN parameters:
(config vpn openvpn server name)> advanced_options enable true
(config vpn openvpn server name)>
b. Configure whether the additional OpenVPN parameters should override default options:
(config vpn openvpn server name)> advanced_options override true
(config vpn openvpn server name)>
Digi Connect IT® 4 User Guide
lan
loopback
modem
wan
(config vpn openvpn server name)>
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config vpn openvpn server name)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
---------------------------------------------------------
----------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config vpn openvpn server name)>
LAN
Loopback
Modem
WAN
OpenVPN
381