Digi Connect IT 4 User Manual page 120

Interfaces
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type:
> modem scan
Issuing network scan, this may take some time...
Status
---------
Available
Available
Available
Available
Available
Available
>
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.

Web
1. Log into the Connect IT 4 WebUI as a user with Admin access.
2. On the menu, click Status.
3. Under Connections, click Modems.
The modem status window is displayed

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modem
To view a status summary for the modem:
n
> show modem
Modem
-----
modem
>
Digi Connect IT® 4 User Guide
Carrier PLMN ID Technology
-------- ------- ----------
T-Mobile 310260 4G
T-Mobile 310260 3G
AT&T 310410 4G
Verizon 311480 4G
311 490 311490 4G
313 100 313100 4G
command:
SIM Status
------------- ---------
1 (ready) connected
Wide Area Networks (WANs)
APN Signal Strength
--------- --------------------
1234 Good (-84 dBm)
120