Table of Contents
Advertisement
Command line interface
support-report-0040D0133536-23-05-03-21:24:00.bin
>
Display status and statistics using the show command
The Connect IT 4 show command display status and statistics for various features.
For example:
show config
The
show config
command displays all the configuration settings for the device that have been
changed from the default settings. This is a particularly useful when troubleshooting the device.
> show config
auth tacacs+ service "login"
auth user admin password
"$2a$05$WlJQhquI7BgsytkpobKhaeLPtWraGANBcrlEaJX/wJv63JENW/HOu"
add auth user test
add auth user test group end "admin"
add auth user test group end "serial"
auth user test password
"$2a$05$RdGYz1sLKbWrqe6cZjlsd.otg03JZR6n9939XV6EYWUSP0tMAzO5W"
network interface lan ipv4 type "dhcp"
network interface lan zone "external"
network interface modem modem apn 0 apn "00000.000"
network interface modem modem apn_lock "true"
schema version "445"
>
show system
The
show system
usage.
> show system
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version
Alt. Firmware Build Date : Wed, May 3, 2023 21:24:00
Bootloader Version
Current Time
CPU
Uptime
Temperature
Digi Connect IT® 4 User Guide
command displays system information and statistics for the device, including CPU
: Digi Connect IT 4
: Connect IT 4-000065
: Connect IT 4
: Connect IT 4
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 23.3.31.129
: 23.3.31.129
: 19.7.23.0-15f936e0ed
: Wed, May 3, 2023 21:24:00 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
: 40C
Display status and statistics using the show command
920
Advertisement
Table of Contents
