Configure An Snmp Trap - Digi Connect IT 4 User Manual

Configure Connect IT features
b. In the SMTP server name field, enter the host name or IP address of the SMTP server.
c. In the SMTP server port field, enter the TCP port of the SMTP server.
d. In the Server user name field, enter the server login name.
e. In the Server password field, enter the server password.
f. In the Email from address field, enter the email address that should be placed in the From
field on an email.
g. the Email to address field, enter the email address that should be place in the To field on
an email.
h. In the Email subject field, enter the text for the subject line of the email.
6. Click Apply to save the configuration and apply the change.
Configure an SNMP trap
When this feature is enabled, you can configure an SNMP trap destination.
Note This configuration works with the
1. Log in to the web
2. Click System > Device Configuration. The Configuration page displays.
3. Expand System > Log.
4. Expand SNMP traps.
5. Click Enable. The slider is blue when enabled.
6. Add a destination.
a. Click Add Destination.
b. In the Host Name field, enter the host name or IP address of the SNMP destination.
c. In the Port field, enter the UDP port of the SNMP destination. The default is 162.
d. In the Community name field, enter the SNMP destination community name. The default
is public.
e. Repeat this process to add an additional destination, if needed.
7. Click Apply to save the configuration and apply the change.
Digi Connect IT® 4 User Guide
Send Email notification and/or an SNMP trap when an event occurs
Enable SNMP traps
UI.
option on the Event Categories page.
53