Digi Connect IT 4 User Manual page 758

Firewall
To verify the implementation:

Web
This procedure assumes you have already configured web filtering to use either Cisco Umbrella or the
Cisco open DNS servers.
See Configure web filtering with Cisco Umbrella
n
with Cisco Umbrella.
See Configure web filtering with manual DNS servers
n
filtering to use Cisco open DNS servers.
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Disable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to disable.
c. Click Apply to save the configuration and apply the change.
4. From a new tab in your browser, attempt to connect to the Cisco test
URL http://www.internetbadguys.com.
The connection should be successful.
5. Return to the Connect IT 4 WebUI and enable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to enable.
c. Click Apply to save the configuration and apply the change.
Digi Connect IT® 4 User Guide
for information about configuring web filtering
for information about configuring web
Use Digi Remote Manager to view and manage your
Web filtering
758