Digi Connect IT 4 User Manual page 607

Applications
iii. Add an application entry:
(config)> add system schedule script end
(config system schedule script 0)>
Scheduled scripts are enabled by default. To disable:
(config system schedule script 0)> enable false
(config system schedule script 0)>
iv. Provide a label for the script:
(config system schedule script 0)> label "Show system application"
v. Configure the application to run automatically when the device reboots:
(config system schedule script 0)> when boot
(config system schedule script 0)>
vi. Configure the application to restart if it crashes:
(config system schedule script 0)> exit_action restart
(config system schedule script 0)>
vii. Set the command that will execute the application:
(config system schedule script 0)> commands "python
/etc/config/scripts/showsystem.py"
(config system schedule script 0)>
viii. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
b. Run the showsystem.py application. You can run the application by either rebooting the
device, or by running it from the shell prompt.
n
n
Digi Connect IT® 4 User Guide
To reboot the device:
i. From the WebUI:
i. From the main menu, click System.
ii. Click Reboot.
i. From the command line, at the Admin CLI prompt, type:
> reboot
To run the application from the shell prompt:
i. Select a device in Remote Manager that is configured to allow shell access to
the admin user, and click Actions > Open Console. Alternatively, log into the
Connect IT 4 local command line as a user with shell access.
Develop Python applications
607