Digi Connect IT 4 User Manual page 111

Interfaces
f. (Optional): Configure the public APN. If the public APN is not configured, the Connect IT 4
will attempt to determine the APN.
i. Click to expand APN list > APN.
ii. For APN, type the public APN for your cellular carrier.
g. For Add Interface, type WWAN_Private and click .
h. For Interface type, select Modem.
i. For Zone, select External.
j. For Device, select Modem .
This should be the same modem selected for the WWAN_Public WWAN.
k. Enable APN list only.
l. Click to expand APN list > APN.
m. For APN, type the private APN provided to you by your cellular carrier.
Digi Connect IT® 4 User Guide
Wide Area Networks (WANs)
111