Show Lan Status And Statistics - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

Show LAN status and statistics

1. Log into the Connect IT 4 WebUI as a user with Admin access.

2. From the menu, click Status.

3. Under Networking, click Interfaces.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the

Connect IT 4 local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. Enter the

show network

> show network

----------------

defaultlinklocal

3. Additional information can be displayed by using the

> show network verbose

----------------

defaultlinklocal

Digi Connect IT® 4 User Guide

command at the Admin CLI prompt:

-------------------------------

192.168.210.1/24

169.254.100.100/16

192.168.2.1/24

fd00:2704::1/48

10.10.10.10/24

fe00:2404::240:f4ff:fe80:120/64

10.200.1.101/30

Local Area Networks (LANs)

show network verbose