Firmware configuration
Command
~b.
~bB
~bc
~br
~bP
~bO
~bN
~b?
7. Enter ~b. to disconnect from the port.
Digi Connect IT® 4 User Guide
Description
Disconnect from the port.
Send a BREAK sequence.
Clear the history buffer.
Send a DTR reset sequence.
Cycle the outlets on this port.
Turn the power off, then on. If the power state for the outlet is
currently off, then the power is just turned on.
Power off all the outlets on this port.
Power on all the outlets on this port.
Display a list of commands.
Access the terminal screen from the web UI
37