Digi Connect IT 4 User Manual page 753

Firewall

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Web filtering service.
4. Click Enable web filtering to enable.
5. For Web filtering service, select Cisco Umbrella.
6. Paste the API token that was generated in
7. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Task one: Generate a Cisco Umbrella API
Web filtering
token.
753