Routing Services; Configure Routing Services - Digi Connect IT 4 User Manual

Routing

Routing services

Your Connect IT 4 includes support for dynamic routing services and protocols. The following routing
services are supported:
Service or
protocol
BGP
IS-IS
NHRP
OSPFv2
OSPFv3
RIP
RIPng

Configure routing services

Required configuration items
Enable routing services.
n
Enable and configure the types of routing services that will be used.
n

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
Digi Connect IT® 4 User Guide
Information
The Border Gateway Protocol (BGP) service supports BGP-4 (
The IPv4 and IPv6 Intermediate System to Intermediate System (IS-IS) service
RFC1142
( ).
Next Hop Resolution Protocol (NHRP) (
authentication.
The IPv4 Open Shortest Path First (OSPF) service supports OSPFv2 (
The IPv6 Open Shortest Path First (OSPF) service supports OSPFv3 (
The IPv4 Routing Information Protocol (RIP) service supports RIPv2 (
RFC1058
and RIPv1 ( ).
The IPv6 Routing Information Protocol (RIP) service supports RIPng (
RFC2332
). Does not support NHRP
Use Digi Remote Manager to view and manage your
IP routing
RFC1771
).
RFC2328
).
RFC2740
).
RFC2453
)
RFC2080
).
272