Digi Connect IT 4 User Manual page 304

Routing

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type
> show vrrp
VRRP
----
VRRP_test
VRRP_test
>
3. To display additional information about a specific VRRP instance, at the Admin CLI prompt, type
show vrrp name
> show vrrp name VRRP_test
VRRP_test VRRP Status
---------------------
Enabled
Status
Interface
IPv4
----
Virtual IP address(es) : 10.10.10.1, 100.100.100.1
Current State
Current Priority
Last Transition
Became Master
Released Master
Adverts Sent
Adverts Received
Priority Zero Sent
Priority zero Received : 0
Digi Connect IT® 4 User Guide
show vrrp:
Status Proto State
------ ----- ------
Up IPv4 Backup
Up IPv4 Backup
name:
: True
: Up
: lan
: Master
: 100
: Tue Jan
: 1
: 0
: 71
: 4
: 0
Virtual Router Redundancy Protocol (VRRP)
Virtual IP
-------------
10.10.10.1
100.100.100.1
1 00:00:39 2019
304