Introduction; About This Manual; Machine Model And Serial Number; Using This Manual - jcb TM310 Operator's Manual

Table of Contents

Advertisement

Machine Model and Serial Number

This manual provides information for the following
model(s) in the JCB machine range:
TM310, TM310S and TM310WM from machine serial
number 1314700.

Using this Manual

This manual is arranged to give you a good understanding
of the machine and its safe operation. It also contains
maintenance information and specification data. Read this
manual from front to back before using the machine for the
first time. Particular attention must be given to all the safety
aspects of operating and maintaining the machine.
If there is anything you are not sure about, ask your JCB
distributor or employer. Do not guess, you or others could
be killed or seriously injured.
General warnings in this chapter are repeated throughout
the book, as well as specific warnings. Read all the safety
statements regularly, so you do not forget them.
Remember that the best operators are the safest
operators.
The illustrations in this manual are for guidance only.
Where the machines differ, the text and or the illustration
will specify.
This manual contains original instructions, verified by the
manufacturer (or their authorised representative).
The
manufacturer's
policy
improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will
be accepted for discrepancies which may occur between
specifications of the machine and the descriptions
contained in this publication.
All optional equipment included in this manual may not be
available in all territories.
3

Introduction

About this Manual

T1-044
is
one
of
continuous
9821-0650-3

Left Side, Right Side

In this manual, 'left' A and 'right' B mean your left and right
when you are seated correctly in the machine.
Fig 1.

Cab/Canopy

This manual frequently makes references to the cab. For
instance, 'do not operate the machine without a manual in
the cab'. It should be noted that these statements also
apply to canopy build machines.

Cross References

In this publication, page cross references are made by
presenting the subject title printed in bold, italic and
underlined. It is preceeded by the 'go to' symbol. The
number of the page upon which the subject begins, is
indicated within the brackets. For example:
References ( T
3).
C087420
T1-003_2
T1-004_2
K Cross
3

Advertisement

Table of Contents
loading

Table of Contents