EN
Configure the TFF fork carriage and couple it to the rotating telehandler
Position the rotating telehandler with TFF fork carriage coupled in a safe place, with ample cle-
arance and clear of obstacles of any sort.
- lower the telescopic arm holding the forks just lifted off the ground (
- release both fork (3,
fasten them (2,
51),
- move both forks (4,
ting the sliding blocks (1,
the screws (2,
52),
- lower the arm to rest the forks (5,
51) remove the sliding blocks (1,
52) towards the outside of the fork carriage and retain them by refit-
52) towards the inside of the fork carriage, fastening them with
535) on the ground,
50) ,
51), by undoing the screws with
40
50
2
2
2
2
1
1
1
2
1 1
1
2
3 3
51
4
4
52
5
5
53