Manitou MRT-X 2470 Privilege Plus ST3A S1 Operator's Manual page 302

EN
- position the ballast (35,
- align the rotating telehandler with the ballast and move the arm to approach the fork carria-
ge to the handling pockets (36,
- move the arm slowly to insert the fork and make the tips of the forks (37,
- tilt and slightly lift the fork carriage backwards (38,
towards the structure of the fork carriage until they come into contact,
note: if the fork carriage is equipped with protective grid (40,
the specific housings (41,

its lock pins (42,
- Tilt the fork carriage as far as possible forwards mo-
ving the tips of the forks upwards (43,
- position the fully lowered and retracted arm

(44, 21),
- travelling on the road is possible in this condition

( 21).

16) on the ground ,

17) of the ballast,


19) on the lower part of the fork carriage, then secure it with
19).

20),

18) protrude,

19) to make the ballast (39, 19) slide

19), remove it and place it in
44
21
30
35
16
36
36
17
37
37
18
38
40
39
41
42
19
43
20