Manitou MRT-X 2470 Privilege Plus ST3A S1 Operator's Manual page 303

Configure the TFF fork carriage and couple it to the rotating telehandler
Position the rotating telehandler with TFF fork carriage coupled in a safe place, with ample cle-
arance and clear of obstacles of any sort.
- lower the telescopic arm holding the forks just lifted off the ground (

- release both fork (3, 23) remove the sliding blocks (1,

fasten them (2, 23),

- move both forks (4, 24) towards the outside of the fork carriage and retain them by refit-

ting the sliding blocks (1,

the screws (2, 23),
- lower the arm to rest the forks (5,

23) towards the inside of the fork carriage, fastening them with

25) on the ground,

22) ,
23), by undoing the screws with
31
22
2
2 2
2 1
1
1
2
1 1
1
2
3 3
23
4 4
24
5
5
25
EN