Manitou MRT-X 2470 Privilege Plus ST3A S1 Operator's Manual page 299


• move the second fork (8,

gap (9, 7) under the lower guide (10,
• tilt the fork carriage forwards to rest both forks (11,
them from the upper part (12,
- move the rotating telehandler to the opposite side of the fork and align it (13,

others (14, 8),
- refit the forks on the fork carriage:
• move the telescopic arm to approach the fork carriage to the forks,
• tilt the fork carriage backwards slightly to align the upper part (15,

(16, 9) of the fork carriage with the lower guide (17,
the first fork to be fitted,
• push the upper guide (18,

(15, 9) so as to insert it by a few centimetres,
• slightly lift the arm to insert the lower guide (17,

of the fork carriage (16,
7) towards the centre of the fork carriage aligning it with the

7) of the fork carriage,

7) on the ground and then release

7) of the fork carriage.


9) of the first fork on the upper part of the fork carriage

9) of the first fork with the lower part
9),

8) with

9) and the lower part

9) and upper guide (18, 9) of
27
8
10
9
11
11
12
7
14
8
18
15
16
17
9
EN
13