Web Interface; Overview - Siemens SWT 3000 Equipment Manual

6.4

Web Interface

Overview

6.4.1
You can access the Web server via the front Ethernet interface of PU4 module.
Start the Web browser (for example Internet Explorer) and enter http://192.168.20.200. You can also change
the default IP address 192.168.20.200.
Log on with the password swtwrite (you can change the default password) and click Send in the SWT 3000
Web interface dialog.
NOTE
i
i
For security reasons it is recommended to enable a safe https-connection for the access to the Web inter-
face or to disable the Web server access via the service program PowerSys in configuration menu SWT
3000 > Configuration > Net Configuration > IP Configuration.
For details, please refer to the chapters
Without knowing the password, access to the SWT 3000 Web interface is not possible. You can restore the
default password after clicking on Clear CDB in PowerSys commands dialog.
Change the default password via:
•
Web server in the Access Password page or
•
SNMP
The default IP address of the device is 192.168.20.200.
Change the default IP address via:
•
Web server in the Ethernet Interface Settings page or
•
SNMP
You can only read the password and IP address via:
•
SNMP Agent dialog in PowerSys SWT 3000 > Configuration > Net Configuration.
•
IP Configuration dialog in PowerSys SWT 3000 > Configuration > Net Configuration.
[scwebser-300414-01, 1, en_US]
Figure 6-30
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
3.5.13 IP Network
Start Page of SWT 3000 Web interface
Configuration.
SNMP and Remote Access
6.4 Web Interface
299