En100 Settings - Siemens SWT 3000 Equipment Manual

PowerSys and Auxiliary Software Tools
5.8 MergeTool for IEC 61850
•
Click the CFG File button.
The following dialog appears:
[sccfgsel-080911-01.tif, 1, en_US]
Figure 5-68
Define the name and place of storage of the CFG file.
Afterwards, click Save.
In order to generate the EN100 parameter file (BIN file) and PowerSys preconfiguration file (CFG file), click the
Generate button.
NOTE
i
i
If SWT 3000 is equipped with an EN100 module, the BIN file and CFG file are configured in PowerSys >
SWT 3000 > Configuration > System-2 > EN100 area.

EN100 Settings

5.8.3
When using the EN100 module, there are some additional (none IEC 61850) configuration settings for the
EN100 module. These settings have to be put in the parameter file downloaded to the EN100 module at
startup.
Therefore, the MergeTool provides a Graphical User Interface (GUI) for the configuration of EN100 settings
and stores these settings in a separate file. This option provides the implementation of the GUI elements
processing the user interaction for the EN100 settings file manipulation.
NOTE
i
i
It is not necessary to create an EN100 settings file (IFD file). A default IFD file for the selection of the input
file is presented to the MergeTool user.
If there is a new IFD file needed, proceed like described in the following.
Select the EN100 Settings button in the MergeTool dialog.
The following MergeTool > [EN100 Interface Settings] dialog appears:
262
Selection of Name and Place of the CFG File
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020