SNMP and Remote Access
6.3 Remote Access
The RM function enables the user to have access via a USB or TCP/IP connection with the service program to
the following function:
•
Query of the device data (configuration, parameter, and status) of the remote device
•
Temporary adjustments (for example, test loops)
•
Producing a reset
Changing of the configuration and parameter (except date or time of the SWT 3000 device) in the remote
device is possible if the configuration via inband RM-Channel is activated:
[scrmconf-121011-01.tif, 1, en_US]
Figure 6-26
6.3.3
Route Coupling via SSB
Via an additional interface (SSB), up to 5 transmission routes can be coupled.
[dwroutco-080611-01.tif, 1, en_US]
Figure 6-27
296
Configuration via Inband RM-Channel
Example of a Route Coupling with the RM Function
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020