5.8
MergeTool for IEC 61850
Overview
5.8.1
The IEC 61850 Intelligent Electronic Device (IED) configuration philosophy of SWT 3000 is to have a separate
static IED Capability Description (ICD) file for each possible SWT 3000 I/O configuration. These ICD files are
imported in the IEC 61850 system configurator (DIGSI®) for substation configuration.
When the substation configuration is finished, the MergeTool
(SCD) file (of the substation configuration) and generates the following 2 files:
•
EN100 parameter file (BIN file)
•
PowerSys preconfiguration file (CFG file)
PowerSys imports these 2 files into PU4 board.
The MergeTool dialog contains the Parameter Generator and EN100 Settings buttons.
Parameter Generator
5.8.2
Select the Parameter Generator button in the MergeTool dialog.
The following MergeTool > [Parameter Generator] dialog appears:
[scpargen-141011-01.tif, 1, en_US]
Figure 5-61
10
MergeTool covers the offline configuration of the IEC 61850 related settings for SWT 3000.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
MergeTool > [Parameter Generator] Dialog
PowerSys and Auxiliary Software Tools
5.8 MergeTool for IEC 61850
10
reads the Station Configuration Description
255