Remote Access; General Information; Overview - Siemens SWT 3000 Equipment Manual

SNMP and Remote Access

6.3 Remote Access

6.3 Remote Access

General Information

6.3.1
6.3.1.1

Overview

The TCP/IP connection via Intranet as well as a RAS connection serves complete system functionality adminis-
tration identical to local on-site operation. Standard TCP/IP network protocols are used for easy access to each
SWT 3000 from anywhere within a company Intranet. The system can interface with your own network
security systems and firewalls, providing you with just the right security level your company requires.
The remote access to the SWT 3000 is possible with the service program PowerSys. With the PowerSys menu
Options > Connection, the connection to the device via TCP/IP must be configured.
For a TCP/IP connection, select TCP/IP in the Communication list box.
[scconfco-251011-01.tif, 1, en_US]
Figure 6-23
Enter the IP address and port of the RAS or SWT 3000 device.
For the PowerSys connection, select Device in the Data Source menu or use the corresponding button (Data
source Device) in the menu bar as follows:
294
Configuration Example for the TCP/IP Connection
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020