Https Connection - Siemens SWT 3000 Equipment Manual

After having activated the settings, the certificate is created and stored into flash. The system is restarted
automatically.
NOTE
i
i
Due to the processing power limitation of the PU4 controller, creating a certificate can take several
minutes.
NOTE
i
i
If HTTPS is enabled and no valid certificate is created before, a default certificate will be created for Power-
Link and SWT 3000 after the system startup.
2.13.3

HTTPS Connection

HTTPS connection is configured in PowerSys of PowerLink > Configuration > Ethernet > IP (service port) or
SWT 3000 > Configuration > Net Configuration > IP Configuration.
[schttpsc-080513-01.tif, 1, en_US]
Figure 2-31
Disabled HTTP and HTTPS are disabled
HTTP HTTP is enabled (default option).
You can access the web page via HTTP protocol (e.g. http://192.168.20.200)
HTTPS HTTPS is enabled.
You can access the web page via HTTPS protocol (e.g. https://192.168.20.200)
When accessing the device web page using an HTTPS protocol for the first time, an error message occurs
mentioning that the certificate is not trusted. In order to enable the trust, you have to install the certificate in
Trusted Root Certification Authorities Store. Continue to this website as shown in
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Parameter: HTTP Connection
Functional Description
2.13 Cyber Security
Figure 2-32.
89