Siemens SWT 3000 Equipment Manual page 151

[ScLEDindic-03042014-01, 1, --_--]
Figure 3-44
Table 3-50
Parameter
Ethernet connection
Path protection (1+1)
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Examples of Configuration and LED Indications of the Ethernet Connection
Description of the Ethernet Connection Selection
Comments
EN100-TPoP: EN100-TPoP is enabled.
Off : EN100-TPoP is not enabled
Analog + Digital 1 or 2
Digital 1 + Digital 2
Analog + Ethernet
Ethernet + Digital 1 or 2
Ethernet (EN100-TPoP) can be configured as primary or secondary connection.
Installation and Commissioning
3.5 Device Configuration
151