Activation Of Settings - Siemens SWT 3000 Equipment Manual

SNMP and Remote Access
6.2 SNMP
Table 6-12
Settings
SNMP - Read Only Access
SNMP - Read Write Access
Send
Reset
6.2.4.4

Activation of Settings

Within this menu, you can program all the settings to the flash of SWT 3000. Programming the device causes a
reset of SWT 3000.
[scactset-300414-01, 1, en_US]
Figure 6-22
292
Access Password
Activation of Settings
Comments
The read community, write community, and trap
community must meet the following criteria:
•
English uppercase characters (from A to Z)
•
English lowercase characters (from a to z)
•
Numerals (from 0 to 9)
A mixture of characters and numerals is permitted.
Character string: maximum 10 characters
Default: swtread
Must be identically with the community string in the
NMS
The read community, write community, and trap
community must meet the following criteria:
•
English uppercase characters (from A to Z)
•
English lowercase characters (from a to z)
•
Numerals (from 0 to 9)
A mixture of characters and numerals is permitted.
Character string: maximum 10 characters
Default: swtwrite
Must be identically with the community string in the
NMS
Send the values to the PU4 module.
Reject the changes.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020