Installation and Commissioning
3.5 Device Configuration
[ScOutputAlloc_2, 1, --_--]
Figure 3-26
Signaling Allocation
3.5.7
The submenu Signaling Allocation is used to configure in a flexible way the output ports of IFC-D/P/S as
command signaling outputs for any input or output command.
Signaling allocation affects the following allocations:
•
2CMD+ACK
•
Contact doubling
•
IFC-S signaling
In the following example, you can see an example of the operating Mode 5D with IFC-1 and IFC-3 equipped as
IFC-D/P boards while IFC-2 and IFC-4 are IFC-S boards.
136
Free Allocation of the Command Output
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020