Siemens SWT 3000 Equipment Manual page 211

NOTE
i
i
It is recommended to set the password according to the highest password complexity (green bar).
Before starting the password setting, make sure the User Level list box is set as Admin in PowerSys main
menu Options > Connections.
[scpasswo-080513-01.tif, 1, en_US]
Figure 5-10
Password complexity and rules for indication check:
•
a) Minimum password length of 8 characters
•
b) At least one upper case letter
•
c) At least one lower case letter
•
d) At least one digit
•
e) At least one special character (e.g. !@#$)
Password complexity indication
PowerLink as well as SWT 3000 are delivered ex factory without passwords. Optionally you can set a password
for each user level for the PowerLink or SWT 3000 connection. The option Password change appears when
the PowerLink or SWT 3000 device is connected. For assigning of an initial password for the first time, leave
the field Current Password blank and select one of the 3 different user levels. Each user level can be assigned
with an individual password.
If a password protects the device, perform the following instructions to change the password:
•
Enter the current password in the field Current Password.
•
Enter the New Password.
•
Confirm the new password in the field Retype Password.
All 3 passwords (for the PowerLink connection) are saved in the memory of the CSPi module. SWT 3000 saves
the passwords (3 different user levels, each with an individual password) in the memory of the module PU4.
The passwords can be removed from the device by blanking the New Password and Retype Password fields.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Password Setting
PowerSys and Auxiliary Software Tools
Comments
2 or less of these rules matched
3 rules matched with mandatory rule a)
4 or more rules matched with mandatory rule a)
5.2 PowerSys Startup
211