Jumper Settings For The Pu4 Module - Siemens SWT 3000 Equipment Manual

Jumper Settings for the PU4 Module

3.3.3
[scpu4jum-220513-01.tif, 1, en_US]
Figure 3-8
1 S2: Power ON/OFF
2 LED OK/GBAL
3 LED Status Interface LID-2
4 LED Status Interface LID-1
5 LED Status Interface LIA
6 S1: Reset button
7 S3 (3.1 to 3.4)
8 Connection on DLE
9 Connection on DLE
10 Connection of the IFC Modules
11 LCT: Service Interface (USB)
12 NMS: Ethernet Interface
The Digital line equipment is not applicable for PowerLink 50.
Table 3-19
Switch Number
S3.1
S3.2
S3.3
S3.4
NOTE
i
i
For normal operation all switches must be in the OFF-position.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Position of Jumpers, Input and Signaling Elements on the PU4 Module
Function of the S3 DIP Switch on the PU4 Module
Position
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Installation and Commissioning
3.3 Jumper Settings for SWT 3000 Modules
Function
Normal operation
Programming with Memtool
Monitor inactive
Monitor active
Disable debugger
Enable debugger
Disable initialization in monitor
Enable initialization in monitor
113