Tpop Configuration - Siemens SWT 3000 Equipment Manual

Installation and Commissioning
3.5 Device Configuration
[scconfom-111011-01.tif, 1, en_US]
Figure 3-42
All setting options for the interfaces are also shown in
case, the X.21 interface must be selected.
Refer also to 3.3.4.2 Jumper Settings for the Selection of Digital Line Interfaces LID-1
Settings for the Selection of Digital Line Interfaces

TPoP Configuration

3.5.11
Ethernet line interface is enabled in PowerSys of SWT 3000 > Configuration > System in
It supports 1+1 path protection with other analog or digital transmission path. The LED for unused LID-1 or
LID-2 is used for indication of Ethernet line connection status as described in
green color after the configuration is finished.
[ScEnTPoP-28032014-1, 1, --_--]
Figure 3-43
150
Example of a System Configuration for a FOM Connection with 64 Kbps
Ethernet Connection Selection
3.5.3.2 Line Interface. On the DLE module in each
LID-2).
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
and 3.3.4.3 Jumper
Figure 3-43.
Figure 3-44. The LED must be in