Siemens SWT 3000 Equipment Manual page 158

Installation and Commissioning
3.5 Device Configuration
The tab <IP Configuration>contains the read-only information for the basic IP- configuration of the device as
configured by the web interface. The following parameters are directly configured in PowerSys.
Table 3-53
Selection
HTTP Connection
PowerSys TCP/IP Connection > SSL
Encryption
For Details, refer to Chapter Cyber Security.
158
Menu <SWT 3000 - Configuration - Net Configuration>, Tab <IP configuration>
Setting Option
Disabled
HTTP
HTTPS
Comment
HTTP and HTTPS are disabled
HTTP is enabled (default option). You can access
the web interface via HTTP protocol (e.g. http://
192.168.20.200)
HTTPS is enabled. You can access the web inter-
face via HTTPS protocol (e.g. https://
192.168.20.200) The installation of security
certificates on the Service PC is required.
SSL Encryption for PowerSys connection to device
disabled (default setting)
SSL Encryption for PowerSys access enabled in
PowerLink. The setting requires a SSL encrypted
PowerSys connection: Select SSL Encryption in
PowerSys > Options > Connection
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020