Siemens SWT 3000 Equipment Manual page 222

PowerSys and Auxiliary Software Tools
5.2 PowerSys Startup
PowerSys_35110.exe [/P | /F] [IP address],[user level],[password],[RM address],[SSL Encryption]
User level
Password
RM address
SSL Encryption
Example 1: Open PowerSys and connect with IP address "192.168.20.200" and user level "Admin"
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /P 192.168.20.200,A
Example 2: Open PowerSys and connect with IP address "192.168.20.201", user level "Expert" and password "1234"
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /P 192.168.20.201,E,1234
Example 3: Open PowerSys and connect with IP address "192.168.20.202", user level "Control" and RM address
"11"
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /P 192.168.20.202,C,,11
It is also possible to define the startup parameters in the configuration file StartupPara.txt. For example, the
parameters below are defined
•
192.168.20.200,A
•
192.168.20.201,E,1234
•
192.168.20.202,C,,11
•
192.168.20.203,E,1234,,S
The PowerSys command line can be simply written as below (see following examples).
EXAMPLE 4: Open PowerSys and connect with IP address "192.168.20.203", user level "Expert", password "1234"
and SSL Encryption.
C:\Program Files\PowerSys\P3.5.130\PowerSys_35110.exe /P 192.168.20.203,E,1234,,S
Example 5: Open PowerSys and connect with IP address "192.168.20.200" and user level "Admin".
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /F 192.168.20.200
Example 6: Open PowerSys and connect with IP address "192.168.20.201", user level "Expert" and password "1234"
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /F 192.168.20.201
222
User level used to connect to the target.
Possible values are:
•
A (Admin)
•
E (Expert)
•
C (Control)
If the user level was not selected before, the user level window will pop up.
User password used to connect to the target.
If the user password is configured in PowerSys, it can be provided here. Other-
wise, the password window will pop up.
Optional RM address used to connect to the remote device over RM
SSL Encryption is enabled or not.
Possible value: S
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020