Upload En100 Parameter; Connection - Siemens SWT 3000 Equipment Manual

PowerSys and Auxiliary Software Tools
5.2 PowerSys Startup
5.2.2.4

Upload EN100 Parameter

The EN100 parameters are generated with the EN100 pre-configuration files (*.cfg and *.bin) by the Merge-
Tool.
There are 2 kinds of handling the EN100 parameter file (BIN file):
•
Uploading the BIN file into the PowerSys ddb-file
•
Downloading the BIN file into the SWT 3000 device
You can upload the BIN file into the PowerSys ddb file, and then download it to another SWT 3000 device.
Compared with uploading the existing SWT 3000 configuration, it takes more time to upload the SWT 3000
configuration together with BIN file.
In order to upload the BIN file, a new menu item (Upload EN100 Parameter) is added to the PowerSys >
Options menu.
Refer to 5.2.4.1
This menu item is enabled after PowerSys is connected to the SWT 3000 device.
Select Upload EN100 Parameter in the PowerSys > Options menu to upload the EN100 parameter file (BIN
file) into the record set.
Select save menu to save the BIN file together with the SWT 3000 configuration into the PowerSys ddb file.
An SWT 3000 configuration can be prepared and downloaded into the SWT 3000 device. If an EN100 module
is configured and the BIN file is not selected or does not exist, a warning message appears by clicking the OK
or Apply button.
5.2.2.5

Connection

[scconser-140911-01.tif, 1, en_US]
Figure 5-7
In the Options > Connection dialog, the list box Timeout (PowerSys) for the serial interface of the service PC
is adjustable from 4 s to 60 s.
If there is a Remote Monitoring connection, adjust the timeout of the RM channel in the PowerLink > Config-
uration > RM dialog.
208
Overview.
Configuration of the Serial Interface from the Service PC
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020