Siemens SWT 3000 Equipment Manual page 204

PowerSys and Auxiliary Software Tools
5.1 PowerSys Installation
NOTE
i
i
The COM-port of the USB to UART Bridge controller is only displayed in the Windows Device manager or the
Options > Connection dialog of PowerSys, if PC and SWT 3000 are connected by the USB cable supplied
with the device. The power supply of the SWT 3000 can be switched ON or OFF.
With the PowerSys software, the SWTStraps program is also delivered. The program is useful to carry out the
jumper settings for the SWT 3000 as well as iSWT modules. You can find the SWTStraps program on the
PowerSys DVD.
204 Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020