Snmp Configuration In Swt 3000 Web Interface; Overview - Siemens SWT 3000 Equipment Manual

Field
snmpTargetAddrTagList
snmpTargetAddrParams
snmpTargetAddrRowStatus
Target Address 2
snmpTargetAddrName
snmpTargetAddrTDomain
snmpTargetAddrTAddress
snmpTargetAddrTagList
snmpTargetAddrParams
snmpTargetAddrRowStatus
•
4 - Start trap receiver on target address "192.168.20.10" on port 162.
•
5 - Start trap receiver on target address "192.168.20.11" on port 162.
Configure following security parameters on the receiver:
User Name
testuser

SNMP Configuration in SWT 3000 Web Interface

6.2.4
6.2.4.1

Overview

[scsnmset-300414-01, 1, en_US]
Figure 6-19
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Auth Protocol
MD5
SNMP Settings
Value
group1
AuthPriv-testuser
active(1)
addr2
snmpUDPDomain(.1.3.6.1.6.1.1)
192.168.20.11:162 (192.168.20.11:162)
group1
NoAuthNoPriv
active(1)
Auth Password Priv Protocol
testuser_auth DES
SNMP and Remote Access
6.2 SNMP
Priv Password
testuser_priv
289