Nms Commissioning - Siemens SWT 3000 Equipment Manual

Table 6-13
Settings
Store settings to flash and restart
Send
Reset

NMS Commissioning

6.2.5
The necessary MIBs are available on the PowerSys DVD provided with the SWT 3000 system. They must be
integrated in the NMS. After the NMS has been configured, traps from the SNMP agent are received. It is also
possible to read the general information and configuration of the SWT 3000 system (refer to
Function).
Commands and IP configuration can also be set from the NMS (refer to
and SWT 3000 Set IP Configuration, Page
If SWT 3000 as well as PowerLink devices are managed by the NMS, it is proposed to import the provided MIB
files to the MIB compiler of your NMS in the following sequence:
•
1. SIEMENS-POWERLINK-CSPI.MIB
•
2. SIEMENS-POWERLINK-CSPI-IPCON.MIB
•
3. SIEMENS-POWERLINK-CSPI-VMUX.MIB
•
4. SIEMENS-POWERLINK-CSPI-ISWT3000R3_5.MIB
•
5. SIEMENS-SWT3000R35.MIB
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Activation of Settings
278).
Comments
Save all actual settings in the PU4 module and restart
the PU4 module.
Send the values to the PU4 module.
Reject the changes.
SWT 3000 Set Commands, Page 278
SNMP and Remote Access
6.2 SNMP
6.2.1 SNMP
293