Power Supply - Siemens SWT 3000 Equipment Manual

Table 3-35
Input
BI1
BI2
BI5
BI6
BI9
BI10
BI13
BI14
X = Not available
Every combination of these inputs is possible for transmission. The input/output allocation of each IFC module
is similar. The function 2CMD+ACK can also be used with only 1 Interface module IFC-D/P for transmission of 1
command with acknowledge and second command without acknowledge.
NOTE
i
i
The special allocation 2CMD+ACK can only be enabled in the operating Mode 5D and only, if no IFC-S
modules are configured.
IFC-S Signaling
When an IFC-S module is configured, the IFC-S signaling outputs are automatically enabled with a default (1:1)
allocation
Slot
IFC-2
IFC-4
3.5.4.4

Power Supply

If the SWT 3000 is operated with 2 power supplies, monitoring of the second power supply must be activated
under System-2 Configuration by selecting Power Supply redundant.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Default allocation of Outputs for 2CMD+ACK
Output at the Local
Side (Signaling)
CO4
X
CO8
X
CO12
X
CO16
X
Equipment
IFC-S
IFC-S
Output at the Remote Sides
CO1 + CO3
CO2
CO5 + CO7
CO6
CO9 + CO11
CO10
CO13 + CO15
CO14
Application
IFC-2 / OUT1 : Signaling of IFC-1 command input 1
IFC-2 / OUT2 : Signaling of IFC-1 command input 2
IFC-2 / OUT3 : Signaling of IFC-1 command input 3
IFC-2 / OUT4 : Signaling of IFC-1 command input 4
IFC-2 / OUT5 : Signaling of IFC-1 command output 1
IFC-2 / OUT6 : Signaling of IFC-1 command output 2
IFC-2 / OUT7 : Signaling of IFC-1 command output 3
IFC-2 / OUT8 : Signaling of IFC-1 command output 4
IFC-4 / OUT1 : Signaling of IFC-3 command input 1
IFC-4 / OUT2 : Signaling of IFC-3 command input 2
IFC-4 / OUT3 : Signaling of IFC-3 command input 3
IFC-4 / OUT4 : Signaling of IFC-3 command input 4
IFC-4 / OUT5 : Signaling of IFC-3 command output 1
IFC-4 / OUT6 : Signaling of IFC-3 command output 2
IFC-4 / OUT7 : Signaling of IFC-3 command output 3
IFC-4 / OUT8 : Signaling of IFC-3 command output 4
Installation and Commissioning
3.5 Device Configuration
133