Siemens SWT 3000 Equipment Manual page 243

Click Select All and then Add Sel. >>. The sectors of the application are displayed (according to the sectors
they belong to) in the list box on the right-hand side.
[scaddsel-171011-01.tif, 1, en_US]
Figure 5-46
NOTE
i
i
Wrong file selection results in unsuccessful flash programming. Verify that the selected file matches to
the target, the correct FLASH memory device is selected and enabled and the device is physically
connected.
Click Program to start the programming cycle. The Execute MemTool Command dialog appears and shows
the programming progress. The upgrade starts with programming and verification.
[scstprog-250711-01.tif, 1, en_US]
Figure 5-47
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Dialog of the Sectors in the List Box After clicking Add Selection
Starting of the Programming Process
PowerSys and Auxiliary Software Tools
5.5 PU4 Firmware Upgrade with Mem Tool
243