Siemens SWT 3000 Equipment Manual page 72

Functional Description
2.11 IEC 61850
In the IEC 61850 parameterization workflow following 3 roles are defined:
•
SIPROTEC Expert
•
IEC 61850 Substation Planner: Responsible for the configuration of the IEC 61850 Station.
The tasks assigned are: add IEC 61850 device, network setting, GOOSE mapping etc.
•
SWT 3000 Expert: Responsible for the parameterization of the SWT 3000 device using PowerSys and the
MergeTool.
The tasks assigned are: Generate EN100 BIN / CFG file, import EN100 BIN / CFG file and configure SWT
3000.
The EN100 BIN file is the binary format parameter file for EN100 modules. It contains all necessary infor-
mation that is parameterized in the IEC 61850 system configurator.
The EN100 CFG file is the plaintext format file for PU4 modules. It contains the EN100 IP address and
assigned Tx/Rx commands etc.
With the help of PowerSys, the EN100 BIN file and EN100 CFG file can be transferred to the SWT 3000
device.
[Dw_Workflow, 1, --_--]
IEC 61850 Edition 2
SWT 3000 ICD/IXD/IFD files are stored at MergeTool installation path: PowerSys Installation > \Util\Merge-
Tool
•
ICD_IEC61850-Edition-1\*.icd.
SWT 3000 ICD files for IEC 61850 Edition 1 with number of commands 1 to 8, and 16.
Depending on the required number of GOOSE commands, use the correct ICD file in the IEC 61850
system configurator. Later, use the same ICD file in MergeTool to generate EN100 BIN and CFG files.
SIPROTEC and DIGSI are used as examples to show how to connect to SWT 3000 via IEC 61850 . According to the IEC 61850 standard,
1
any other protection device can also be used to connect to SWT 3000.
SIPROTEC is a protection and monitoring device developped and marketed by SIEMENS.
2
3 DISGI is an engineering and substation planning tool developped and marketed by SIEMENS.
72
1
: Responsible for the parameterization of the SIPROTEC
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
2 3
device using DIGSI 4 or 5.
C53000-G6040-C605-1, Edition 03.2020